hey does anyone have a sugestion on a suspension set up I would like shock and strut already together... if you have one for sale that would be great pm me if you do

No shocks on our cars, struts only.
I suggest a set of KYB's.
Google KYB and you'll find plenty of places to buy them from. You can get a whole set for under $300.

o yea oops forgot been working on cavs and sunfires for the past 2 years forgot about that... does the kyb lower your car more than and inch?

Struts alone won't lower your car, you need the springs for that. I've heard stories that KYB's have a hard time handling lowering springs, but I've also seen some satisfied customers. I guess it all depends on your expectations.

GMPP has a Strut/Spring assembly that's already assembled.
http://www.gmpartsdirect.com/results.cfm?singlepart=1&partnumber=12498354

kool what do you think about struts form 3800 performance with a set of springs that they stock... are they good struts?

I reall;y just want o lower the car and still have good handling i mean I am not running any road corses here... I was looking for like under 400 total

The only struts I see on there are KYB's, the springs I see are Eibach and B&G.
I think the KYB's will give a pogo effect when used with lowered springs.

I just went blank on where you can ket the anti-pogo kit. Someone help me.

yea really i wanna lower the car about 1.5 inches maybe 2 and handling like stock is fine with me.... do you think the stock struts are ok to use with just lowering springs?

1.5"-2" Without Konis is asking for an extremely rough ride, and no handling.

When you install a progressive rate spring, you need to have a strut that can "harness" the recoil. If you install a lowering spring with stock struts, or even an aftermarket strut there will be times that your tire will loose contact with the road. Not something you want while pulling some "G's" on the back roads.

The only "safe" way to drop your car 1.5" is with a Eibach/Koni combo.... Or comparable. It is expensive, and they won't come assembled.

If you aren't concerned about losing your car in the twisties, you can always just clamp the springs.... It will give you the same ride as if you put lowering springs together with stock struts.

well what would be ideal is if someone has a set used for sale because if I spend 1g on something it wont be springs it will be for speed so really I guess I need someone with a used set I can buy... do you know anyone.. and if they had the tools I would consider trading them there set and cash for my stock pair

i put the KYB gr2s from 3800 performance with stock springs. car sits plenty low by itself and the handling is much better(had one rear strut bleed all the strut juice out)

I have the GMPP front struts, and front and rear anti-sway bars, and my car will almost take corners like my Trans Am did. ( almost )

I think ZZP has the anti pogo kit.

That's it!
I went blank on it last night.

I put on the kyb gr2's a few weeks back. It has the pogo thing that you are talking about. Why would this happen. I am still using the stock springs.

Ok, I found the site for ZZP. No one answered the phone, so I will ask it here. Do I have to take the struts out to add in these washers?

Also, I also saw a post about ZZP and if they are still in business, does anyone know?