Topic Options
Rate This Topic
#188876 - 11/25/06 07:32 AM FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
D Offline
Member
Registered: 03/02/06
Posts: 1059
Loc: Brooklyn, NY
Well I hate to say it, but has come down to it. I have to sell my Blower, Lower Intake Manifold, and Mod Hub. Stuff came up and my car just passed 100K and its not worht it to put the Kit on b/c my car is just going to go down in price and the Charger R/T is looking real good.

The parts are brand new and have never been used, they are still sitting in the box ZZP sent them in. All you will need to complete the kit is the ZZP Bulliet Fuel Logs and the kit itself. (I was told they are going to be in on Dec 18th for sure.)

Ok so you will get:
Ported M90 Supercharger for the L36 SS kit.
Lower Intake Manifold w/ the intake gasket.
Modular Pulley system w/o a pulley

I'm asking for $750 + shipping. It cost me $950.
If you wondering this price is with half the core price ZZP charges you.













$750 + shipping

E-mail me or PM me.

Thanks.
_________________________
---Ray Dawson---

1997 Grand Prix GT: ZZP SS M90 Kit--P&P Blower and LIM--3.8" Modular pulley--36# injectors--ZZP Wizair CAI--8.5mm MSD Wires--Autolite 103s@ .052--180* drilled T-stat--Tune Time Performance Tune--ZZP 2.5" D/P w/o Cat--ZZP Stage 1 HV TB--ZZP Power Log & Rear PEM--ZZP Poly Motor & Tranny Mounts--Flowmaster 40 Series Delta Flow Mufflers--Auto Meter Z Series Boost & Oil Pressure Gauges--Aeroforce Interceptor Scan Gauge

New York Metro Club Grand Prix
www.nymcgp.com
Top
#188877 - 11/25/06 10:02 AM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
zuulmusic Offline
Member
Registered: 04/22/05
Posts: 3075
Loc: Cleveland, OH
Ohhh come on, put it on! Throw a 4" on it, drive nice, and it'll run forever.

Hmmmm, I wonder if I can rig up a M90 - CSC dual charged setup on my..... 'doh!!

Good luck with it. Anybody looking to get some more out of their GT would love this setup (and perhaps the savings on insurance by NOT having a GTP), just make sure you feel like doing some mechanical work... doesn't seem too bad though.
Top
#188878 - 11/25/06 11:10 PM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
RooK Offline
Member
Registered: 03/07/05
Posts: 5158
Loc: Southern KY
Honestly, it's overpriced. You can get a whole L67 for less then that and do a top end swap. No offense, but you probably won't get that much out of it.

zuul, zzp already did it for one guy. Also, insurance, at least with my company (state farm) could care less if it's a GTP or GT. I even got identical quotes on a V6 and GT Mustang.
_________________________
'13 Mustang 3.7V6 - MT82
'00 GP SE (L67 Swap, XP, Headers, 3.25")
'98 GTP, '01 Bonne
Top
#188879 - 11/26/06 01:13 AM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
zuulmusic Offline
Member
Registered: 04/22/05
Posts: 3075
Loc: Cleveland, OH
Quote:
Originally posted by RooK:
zuul, zzp already did it for one guy.
who?

Quote:
Originally posted by RooK:

Also, insurance, at least with my company (state farm) could care less if it's a GTP or GT. I even got identical quotes on a V6 and GT Mustang.
definetly not the case here
Top
#188880 - 11/26/06 08:15 AM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
D Offline
Member
Registered: 03/02/06
Posts: 1059
Loc: Brooklyn, NY
Quote:
Originally posted by RooK:
Honestly, it's overpriced. You can get a whole L67 for less then that and do a top end swap. No offense, but you probably won't get that much out of it.

zuul, zzp already did it for one guy. Also, insurance, at least with my company (state farm) could care less if it's a GTP or GT. I even got identical quotes on a V6 and GT Mustang.
The one ZZP sells is overpriced, this one is accually 310 less then what zzp sells it for. Think about it:

Blower core -400
Ported Blower-200
LIM core-100
Ported LIM- 175
LIM Gasket-35
Modular Hub-100
Total- 1010
Then shipping for your blower there then back -100
SO - 1110

Mine comes with all that and its only 750.

Yes you can doa top end swap, but you will spend more oney doign that then this kit. And were can you get a good low milege L67 for under 2K then the tranny for 1K, I've looked that only ones you are going to find for less money are ones with 100K+ in miles. Lastly, when I bought my car it was 400 more every 6 months for the GTP.
_________________________
---Ray Dawson---

1997 Grand Prix GT: ZZP SS M90 Kit--P&P Blower and LIM--3.8" Modular pulley--36# injectors--ZZP Wizair CAI--8.5mm MSD Wires--Autolite 103s@ .052--180* drilled T-stat--Tune Time Performance Tune--ZZP 2.5" D/P w/o Cat--ZZP Stage 1 HV TB--ZZP Power Log & Rear PEM--ZZP Poly Motor & Tranny Mounts--Flowmaster 40 Series Delta Flow Mufflers--Auto Meter Z Series Boost & Oil Pressure Gauges--Aeroforce Interceptor Scan Gauge

New York Metro Club Grand Prix
www.nymcgp.com
Top
#188881 - 11/26/06 03:19 PM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
drummerboy1307 Offline
Member
Registered: 04/30/06
Posts: 3201
Loc: Groton, CT
Dangit!! Wish I had money, what a deal... oh yeah, and I wish I didn't have to get a tranny rebuild too.. gah!
_________________________

'97 SE with alot of mods
Top
#188882 - 11/26/06 09:37 PM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
RooK Offline
Member
Registered: 03/07/05
Posts: 5158
Loc: Southern KY
Quote:
Originally posted by zuulmusic:
Quote:
Originally posted by RooK:
[b] zuul, zzp already did it for one guy.
who?
[/b]
Don't know the guy or even if he had an account over at ClubGP, but Zoomer posted on it probably around a year ago, or close to it.
_________________________
'13 Mustang 3.7V6 - MT82
'00 GP SE (L67 Swap, XP, Headers, 3.25")
'98 GTP, '01 Bonne
Top
#188883 - 11/28/06 04:45 AM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
Nice products and I believe you may get a little more interest at a lower price,since the start of the zzp's ass kit there have been many long delays and the price on the fuel rails is pretty pricey,fyi w-body store is offering a complete top end swap for $999. installed and Hum performance offeres the basic top swap parts for $800. .Chico.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#188884 - 11/28/06 09:24 AM Re: FS: L36 SS M90 Blower, Lower Intake Manifold, and Mod Hub.
D Offline
Member
Registered: 03/02/06
Posts: 1059
Loc: Brooklyn, NY
I didn't know about wbodystore and hum had that, that intresting. I want to lower the price but, i already ate 200 and I can;t afford to eat anymore Hopfully someone will come around and buy them. If not then if they come out with the rail and the kit I will make them my christmas presents..lol...
_________________________
---Ray Dawson---

1997 Grand Prix GT: ZZP SS M90 Kit--P&P Blower and LIM--3.8" Modular pulley--36# injectors--ZZP Wizair CAI--8.5mm MSD Wires--Autolite 103s@ .052--180* drilled T-stat--Tune Time Performance Tune--ZZP 2.5" D/P w/o Cat--ZZP Stage 1 HV TB--ZZP Power Log & Rear PEM--ZZP Poly Motor & Tranny Mounts--Flowmaster 40 Series Delta Flow Mufflers--Auto Meter Z Series Boost & Oil Pressure Gauges--Aeroforce Interceptor Scan Gauge

New York Metro Club Grand Prix
www.nymcgp.com
Top