ok, i got some pics from someone else, but this is the process.

Materials-
6 feet of 3/16 wire cable. $.38 a foot at Home Depot
A pack of 3/16 wire cable. Like $2? at Home Depot
Jack
Jackstand
Tire Iron

Jack the rear of the car up, remove wheel
In front of you is the spring/strut


Drill 3 holes into the car. Circled in the pic.



Feed the cable from behind the frame and up through the holes in the strut.



Cross the cables through the clamp.



Use an 11 socket and tighten the clamps down very tight.
Replace wheel.
Take off jack.