To dismount the engine and tranny... get under the car,

1. take off the flywheel cover (plastic piece)
2. using a long, beefy screwdriver, slowly turn over the motor by wedging the screwdriver in the slots on the flywheel
3. there are 3 bolts holding the flywheel together with the torque converter, undo them all
4. put the screwdriver in between the flywheel and TC and you can separate them (the TC will move back about 1 inch)
5. once everything else is disconnected and the motor is ready to pull, there are 5 bolts holding the engine and trans together. undo em, the last one is the hardest because you have to go from the passenger side wheel well to get to it