#146536 - 04/25/07 09:05 PM
I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 02/24/05
Posts: 76
Loc: minnesota
|
|
I have a dhp 1.0 came out of my 1998 gtp I am asking 75.00 shipped anywhere in the usa
FEATURES:
Speed limiter removed Raised rev limiter Raised shift points 3-1 and 4-2 skip shifts Programmed for race pellet timing Transmission line pressure increased 185F fan turn on 90 second fan on at key-off (this feature activates when engine coolant is 180 degrees or greater) MAF calibration is year specific WOT fueling richen to reduce KR Removes lag by changing downshift tables Correct VIN number programmed in Part throttle KR issue fixed Torque abuse modes are modified to eliminate bog at launch Shift KR is remapped for modified vehicles Power enrichment tables modified for cars running increased boost P0128 code removed for running drilled or 160 Tstats on newer cars Torque converter lockup tables modified to improve transmission life and eliminate ‘converter lockup hunting’
_________________________
TUNED MODS N* TB with 80mm MAF 3.0 2.8 MPS S2IC 42.5 INJECTORS PORTED BLOWER & LOWER INTAKE XP HOT CAM 105 SPRINGS, MOD'D RETAINERS DOUBLE ROLLER TIMING CHAIN TOGS 3'DP 3' TO Y NO CAT 160 DRILLED THERMOSTAT CAI NO EGR AND SOMEOTHER STUFF
|
Top
|
|
|
|
#146537 - 04/26/07 01:29 AM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/03/07
Posts: 3307
Loc: Texas
|
|
Man, if I didn't have to blow $850 to get my car out of the shop, I'd snatch it up...lol
_________________________
Si vis pacem para bellum Speed Kills. Buy a Civic - Save Lives!
|
Top
|
|
|
|
#146538 - 04/26/07 03:38 AM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 11/17/04
Posts: 712
Loc: Kansas (Redneck Country)
|
|
damn, If you could only wait for a couple weeks, I'd take it, but you probably won't have it that long
_________________________
98 GTP GMPP handling kit, HomemadeFWI, MSD coils, Taylor wires, 180 drilled tstat, TR6IX plugs, Intense STD PCM, JimmyC DP, Thrasher shift kit (mild setting), AGX/Intrigue spring setup, drilled/slotted rotors with Hawk HPS pads. Hopefully more to come
|
Top
|
|
|
|
#146539 - 04/26/07 11:43 AM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 03/30/07
Posts: 272
Loc: Illionis
|
|
is that 75 bucks and your paying for the shipping...cause i might have to take you up on that...
_________________________
|
Top
|
|
|
|
#146540 - 04/26/07 02:38 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 09/26/06
Posts: 691
Loc: Philadelphia, PA
|
|
let me know if no one beat me to it, maybe ill take it!
_________________________
03 GTP: 06 seats-roof rails-fbody brakes-limited edition gauges-slp spoiler-gmpp exhaust-06 vette tips-
|
Top
|
|
|
|
#146541 - 04/27/07 11:31 AM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/09/07
Posts: 32
Loc: Liberty, Missouri
|
|
hey if you ship it 2 me ill give u more considering it is in good shape.
_________________________
2003 GTP w/ Custom CAI, U-Bend and Resonator delete, custom 3" exhaust w/ Flowmaster 40's, ZZP 3.5" pulley, ZZP TB spacer and heat shield, NGK TR6's, and ZZP PCM
|
Top
|
|
|
|
#146542 - 04/27/07 05:23 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 02/24/05
Posts: 76
Loc: minnesota
|
|
its in good shape my paypal address is lsalner72@yahoo.com just let me know when you send the money thanks
_________________________
TUNED MODS N* TB with 80mm MAF 3.0 2.8 MPS S2IC 42.5 INJECTORS PORTED BLOWER & LOWER INTAKE XP HOT CAM 105 SPRINGS, MOD'D RETAINERS DOUBLE ROLLER TIMING CHAIN TOGS 3'DP 3' TO Y NO CAT 160 DRILLED THERMOSTAT CAI NO EGR AND SOMEOTHER STUFF
|
Top
|
|
|
|
#146543 - 05/01/07 10:17 AM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/09/07
Posts: 32
Loc: Liberty, Missouri
|
|
questions about the pcm...I get paid on the 4th and am wondering it is safe to use the pcm with a K&N intake and U-Bend Delete, or do I need more mods to support the pcm safely???
_________________________
2003 GTP w/ Custom CAI, U-Bend and Resonator delete, custom 3" exhaust w/ Flowmaster 40's, ZZP 3.5" pulley, ZZP TB spacer and heat shield, NGK TR6's, and ZZP PCM
|
Top
|
|
|
|
#146544 - 05/01/07 10:54 AM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 02/24/05
Posts: 76
Loc: minnesota
|
|
it will work just fine with those mods
_________________________
TUNED MODS N* TB with 80mm MAF 3.0 2.8 MPS S2IC 42.5 INJECTORS PORTED BLOWER & LOWER INTAKE XP HOT CAM 105 SPRINGS, MOD'D RETAINERS DOUBLE ROLLER TIMING CHAIN TOGS 3'DP 3' TO Y NO CAT 160 DRILLED THERMOSTAT CAI NO EGR AND SOMEOTHER STUFF
|
Top
|
|
|
|
#146545 - 05/01/07 12:37 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/09/07
Posts: 32
Loc: Liberty, Missouri
|
|
sweet...how do I go about paying you for it?
_________________________
2003 GTP w/ Custom CAI, U-Bend and Resonator delete, custom 3" exhaust w/ Flowmaster 40's, ZZP 3.5" pulley, ZZP TB spacer and heat shield, NGK TR6's, and ZZP PCM
|
Top
|
|
|
|
#146546 - 05/01/07 12:42 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/30/06
Posts: 3201
Loc: Groton, CT
|
|
Paypal is best for most people. His payment address (as stated above) is lsalner72@yahoo.com
I would really recommend you do this mod because then you would be able to drop to the 3.5" defintitely.
_________________________
'97 SE with alot of mods
|
Top
|
|
|
|
#146547 - 05/01/07 01:38 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/09/07
Posts: 32
Loc: Liberty, Missouri
|
|
Thanks, I'm new to all of this since this is the 1st car that I have owned that has a tuning market...no market for 2.5 liter 4 cylinder Buick Century Coupes
_________________________
2003 GTP w/ Custom CAI, U-Bend and Resonator delete, custom 3" exhaust w/ Flowmaster 40's, ZZP 3.5" pulley, ZZP TB spacer and heat shield, NGK TR6's, and ZZP PCM
|
Top
|
|
|
|
#146548 - 05/02/07 03:33 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 03/15/06
Posts: 96
Loc: El Reno, Oklahoma
|
|
Is this still for sale? and if so would it be compatible with a 2000 GTP with Cold Air Intake?
_________________________
FlowMaster 40s, Stainless steel exauhst tips, u-bend delete, 180* Thermostat, Thrasher CAI, New Gunmetal "GTX" Rims, and Black overlays.
|
Top
|
|
|
|
#146549 - 05/02/07 05:15 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Originally posted by Papa_Manz: and if so would it be compatible with a 2000 GTP with Cold Air Intake? yes. a PCM is fine with any mods
_________________________
Corey Smith
|
Top
|
|
|
|
#146550 - 05/02/07 06:28 PM
Re: I have a dhp 1.0 pcm for sale 98-02 gtp only not 03 any mods will work i have 2
|
Member
|
Registered: 04/30/06
Posts: 3201
Loc: Groton, CT
|
|
I think bluegtp91 was buying it?
_________________________
'97 SE with alot of mods
|
Top
|
|
|
|
|
|