Well. The easiest if a complete format using the Windows Setup Disc. Depending on your operating system, it might be easiest to Boot off the Windows Disc (2000,XP) and then run setup. Make sure you delete the partition and create a new one. It will ask you to reformat your drive then. Pretty simple, just follow the steps. But read them carefully. If you don't delete the parition, you'll just end up with 2 Windows installations and everything still there.
But Be Aware.. You'll Lose Everything!!!! - I recommed before starting fresh, get all the latest drivers and such for your hardware onto a CD. You won't have interent Access till your NIC card is setup, and if you don't have the drivers, you wont' be able to set it up!
Cheers and Good Luck.
_________________________
2002 GTP
1987 Buick Grand National
Intense PCM, 3.5" Pulley, SLP C.A.I, 3" D/P, Flipped FSB, U-Bend Delete, Flowmaster 50 Series, Autolite 605's, Drilled 180 Thermo, Falken FK-451's (245/45ZR18), Motegi FF7 Hyper Black 18x7.5, SS Grills, Tint & Overlays here and there.
Previous Topic
Index
