Whoops, edited my post, I meant HUD, not DIC.

Andrew: You may be right, I just know that if I aim my HUD too high/low so its projecting on the non-reflective portion of the windshield, it is not visible. I would assume that is how it would be with a stock, non-HUD equipped vehicle's windshield.

im waiten to see if i hear back from ed about the bezal for the HUD and the Wires

Okay, I will see if I can have FLIP fix it together. It was snap two piece. Maybe hopefully, he can make it magic together then paint it galaxy silver on it.

Jeez, can't you guys take care of some of this in PM's? This thing just exploded like 4 pages in less than a day lol.

Richard as for your DIC issue. The one with the tire pressure sensor will only work in 97's and early 98's I believe.

However, you can use the one with the TCS switch in your GT. The only issue that you will encounter is that the TCS light on the DIC is reversed. When the car is turned on although TCS is engaged the "TCS off" light is on and when the TCS button is pushed the light turns off but TCS is really off as well.

BackInBlack over on ClubGP has a simple mod to fix this problem if it really bothers you but I've had mine like this for 3 months or so and haven't had a problem.

palsut, anyway you can get the white bumper to me for under $150?

Okay. This bumper cover will cost you $39.99 from website. If I send to you. It will cost you around $140 for delivery with wrapper around this bumper. It is suck high shipping price for oversize item.

I need look left side. I don't know if hole thing is snap out or whatever. I know front and right side look good. I believe left fender was wrecked or someone took it out either.

Are you sure you want that? estimate shipping cost $140 + $39.99 bumper cover. It is overprice.

Yea I'll definitely have to skip on that one since I'm getting one from Ed for $150 shipped.

Damn, I really wish I lived where you did, $40 for an almost perfect cover it looks like would be awesome.

Good idea about that. Ed has special delivery price off. That's why business always got cheap delivery than people. When I ordered wrong color bumper from Ed. It is not my fault. Their ebay got wrong color info. I went to Fed Ex to return this. I thought I was supposed pay return shipping but later I got email from Ed that they are paying for "their mistake". I paid over $133 something for that. Boy, I'm glad they didn't charge me and still have item in their location building.

Yeah, 40 buck sound sweet! I used order some parts from Ed but now not anymore. I have this local cheap junk yard better lol

x1000000

ordonez1307: There are 2 U pull & pay in Florida if you still live in Florida.

For whoever love lowest price like $26 HUD than new $200 lol

See U pull & pay location website. Hopefully, it is near you like me.

http://www.upullandpay.com/locations.aspx

those places are hours away. florida is a pretty big state. It might be worth the drive, though.

Boy, I have hard time to unhook the wire. Where HUD wire go to? Fuse box engine? Glove box fuse?

I have torn the whole dashboard out for that wires. Driver side is gone, center is gone then now I'm working on pass side. I already removed the glove box, pass. air bag out. Boy, this HUD is hard. I don't know if it is worth to keep that. CLUB GP link is not helpful about wire thing. I rather not cut the wires. I want to get something to connect from fuse box or glove box fuse make it easy job than wires tied together. I need call this local guy who will install HUD but he is not home. I guess he is on vacation like everyone.

I can't remove the valve cover because the car lift up too high. That's impossible to me work on it when car is too high. Sorry guys!

I left without parts because I'm too darn tired to working on this car for HUD wires for 4 hours. You should see what I done that car lol... I torn it out then put it back seat. Sorry no picture because they don't allow it.

gosh we give you one simple task and you fail lol I AM JUST PLAYEN so dont take that seariously lol,

for the HUD wires we basicly needed the plugs because not all cars are equiped with the plugs for HUD so yes thats what you had to do is snip them just get lots of wire and cut lol

shucks about the valve covers

i have a set andrew, they are halfway filled in, need to be sanded and add some more filler. i just dont have time.

ok thanks... let me know what u want for them ... i just got your lights all boxed up today

I didn't start work on value cover but I know it is too high to reach behind of engine. You could see this picture that car lift too darn high like it was 4x4 suv or something. I spend 4 hours for HUD wires until I got too sweaty and very tired. I went to gas station to eat 1 pint ice cream for cool me down. I was in car like 120 temp with leather seat. Damn! my ass got fire! lol I guess it is waste but I really enjoy knock dash board out with crow bar man you need see that what I did. Maybe I will try bring camera tomorrow if you like to curious.

4drgt... if you want HUD and HUD control wires then I can cut it for you since I already remove black tapes. They are like 2 feet long or something. If ED already have one for you then never mind about that.

I need to go back for get my rail support for side skirt and door supports tomorrow. Maybe get right white fender for my winter beater. It has deep dent by old owner.

I decide drop HUD for my car. Like I say in fog light thread. I don't f**k with wires. I'm very picky so I don't want mess it up. It is no big deal about HUD. I thought try something new but that's not worth for remove dash, speed, and some parts for that.

I will try to see valve cover tomorrow. Don't worry, I will try to work on it. Rail support should take me like 30 minutes to remove nut out then value cover for that. I could have all day for tomorrow. 4 hours with 120 temp inside of car is different story. Tomorrow, I will be outside for less temp.