PCM - Grand Prix Net

You are not logged in. [Log In] Grand Prix Net » Forums » Older Models » 1997-2003 Grand Prix » PCM

Topic Options

Rate This Topic

#91139 - 07/22/06 09:02 PM

PCM

SteveOGTP Offline

Member

Registered: 06/12/06
Posts: 361
Loc: reynoldsburg, ohio

Hey I was wondering which pcm you think i should go with.... I will have a 3 inch downpipe 3 inch cat back exhaust U-bend delete cai and a 3.4 inch pulley after that i will have cams and hopefully down to a 3.0 inch pulley but thats down the road

_________________________
"Well yea, I only have a gp.. but you only have a Honda so your only going to see my tail lights"

Top

#91140 - 07/22/06 09:20 PM

Re: PCM

ordonez1307 Offline

Member

Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL

If you are going to do A CAM, not cams, and that small of a pulley then i would recommend going with the powrtuner. You are deffinately going to want to tune that

_________________________
Corey Smith

Top

#91141 - 07/23/06 12:49 PM

Re: PCM

Member

Registered: 03/02/06
Posts: 1059
Loc: Brooklyn, NY

Yea i would go with a powertuner too, b/c once you install the cam you will need to tune it, so you might want to spend the extra money and do everything to how you want it to be.

_________________________
---Ray Dawson---

1997 Grand Prix GT: ZZP SS M90 Kit--P&P Blower and LIM--3.8" Modular pulley--36# injectors--ZZP Wizair CAI--8.5mm MSD Wires--Autolite 103s@ .052--180* drilled T-stat--Tune Time Performance Tune--ZZP 2.5" D/P w/o Cat--ZZP Stage 1 HV TB--ZZP Power Log & Rear PEM--ZZP Poly Motor & Tranny Mounts--Flowmaster 40 Series Delta Flow Mufflers--Auto Meter Z Series Boost & Oil Pressure Gauges--Aeroforce Interceptor Scan Gauge

New York Metro Club Grand Prix
www.nymcgp.com

Top

#91142 - 07/24/06 08:38 AM

Re: PCM

SteveOGTP Offline

Member

Registered: 06/12/06
Posts: 361
Loc: reynoldsburg, ohio

ok kool sounds good to me I think I am going to get it pro tunnned later anyway

_________________________
"Well yea, I only have a gp.. but you only have a Honda so your only going to see my tail lights"

Top

#91143 - 07/24/06 04:03 PM

Re: PCM

HercMan(Rob) Offline

Member

Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas

I'd recommend an IC if you wanna go to a 3" pulley.

_________________________
http://www.patriotguard.org

Top

#91144 - 07/24/06 06:13 PM

Re: PCM

zachd

Member

Registered: 04/15/04
Posts: 1316
Loc: Evansville, IN

Quote:

Originally posted by HercMan:
I'd recommend an IC if you wanna go to a 3" pulley.

Depending on what CAM he went with he may not need it. Def recommend the PT or HPT and use those to scan. Like hitting 2 birds with one stone. take this for example abbout 249 for ls1m and min 100 for a flashed pcm. about another 150 gets the PT or HPT!!! about...

back to teh CAM if you put a cam in and a INtercooler you maybe able to go smaller on your pulley depending on cam.....

_________________________
2006 GT!!! Yay my first supercharged car!

Top

Previous Topic

Index

Next Topic

Moderator: AustinGTP, Chew, HercMan(Rob), Marc Harbison, Redshift