HV3 insert and rockers - Grand Prix Net

You are not logged in. [Log In] Grand Prix Net » Forums » Older Models » 1997-2003 Grand Prix » HV3 insert and rockers

Topic Options

Rate This Topic

#107262 - 08/27/09 11:30 PM

HV3 insert and rockers

Cerberus Offline

Member

Registered: 12/20/08
Posts: 122
Loc: Saskatchewan, Canada

So I'm planning on installing an HV3 and roller rockers either sunday or monday and was wondering if there are any tips/tricks you guys had. I'm guessing this will be pretty straight forward but looking for all the advice I can get

_________________________
03 GT: K&N FWI, P-Log&PEM, ZZP downpipe, Dynomax ST muffs, HV3 insert, Harland Sharp 1.9 RR's

Top

#107263 - 08/28/09 03:17 AM

Re: HV3 insert and rockers

jorgs_7 Offline

Member

Registered: 11/08/08
Posts: 2689
Loc: Eagan,MN

HV3 Insert

_________________________

Top

#107264 - 08/29/09 06:00 PM

Re: HV3 insert and rockers

Cerberus Offline

Member

Registered: 12/20/08
Posts: 122
Loc: Saskatchewan, Canada

Thanks for the link jorgs, that'll make the HV3 alot easier. As for the rockers, I'm only putting in new rocker arms so would I be able to just swap the new ones in and thats it or do I need to adjust the push rods so they're loaded properly or are they pre-loaded?

_________________________
03 GT: K&N FWI, P-Log&PEM, ZZP downpipe, Dynomax ST muffs, HV3 insert, Harland Sharp 1.9 RR's

Top

#107265 - 08/29/09 06:02 PM

Re: HV3 insert and rockers

ordonez1307 Offline

Member

Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL

Quote:

Originally posted by Cerberus:
Thanks for the link jorgs, that'll make the HV3 alot easier. As for the rockers, I'm only putting in new rocker arms so would I be able to just swap the new ones in and thats it or do I need to adjust the push rods so they're loaded properly or are they pre-loaded?

Don't worry about the push rods, you don't need to load, just leave them in there.

Do you have new rocker arm bolts?

_________________________
Corey Smith