Topic Options
Rate This Topic
#217790 - 04/11/12 09:49 AM Changed my S/C ... connecting the plugs, and low and behold, was connected wrong
Chuck Battams Offline
Junior Member
Registered: 09/18/11
Posts: 18
Loc: Brantford, ON
was wondering ... on my 1998 GTP ... exchanged the S/C, hated that job.

Put everything together, and have not been able to start it, info from our friends on this group brought to my attention, maybe plugs were wrong, being stubborn, I did not check that, finally today I did, and "YES" cyl 4 and 6 were mixed up.

Car turns over nicely, but will not start, did I do any damange?
_________________________
Chuck
Top
#217795 - 04/11/12 02:19 PM Re: Changed my S/C ... connecting the plugs, and low and behold, was connected wrong [Re: Chuck Battams]
HercMan(Rob) Offline
Member
Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas
I wouldn't think so. Check every thing over again to insure all connections are made.
_________________________
http://www.patriotguard.org
Top
#217799 - 04/11/12 10:12 PM Re: Changed my S/C ... connecting the plugs, and low and behold, was connected wrong [Re: Chuck Battams]
crimpton Offline
Member
Registered: 05/01/02
Posts: 2126
Loc: Portland Or.
Make sure the numbers on the coil packs are proper. It should be arranged like this..

firewall

6
3 c..... 2 4 6
2 o..... engine
5 i...... 1 3 5
4 l
1 s

radiator
_________________________
Clint Anderson
'00 Black GTP Sedan

http://pdxcgp.com
Top