I have been battling this problem for weeks. Ever since the cam i have been getting a SES light (p0341-camshaft position sensor). I have had the sensor replaced, but still the light. Did the battery trick, it works for one trip.
What else could it be? Its either the PCM or the magnet the sensor reads from. I am going to get the DH pcm, but i don't want a band-aide fix. If there is a problem I want it fixed. Or will the pcm solve the problem?
Im so frustrated with the entire thing (and the shop ust be to--since i call all the time). Any help would be appreciated-- If someone needs to look at the car, I will travel (within reason).
ed
_________________________
1/4: 14.05 @ 97.X 2.08 60 ft
2000 GTP/GTX, SLP Exhaust, SLP Rear Wing, U bend removed, 3.4 pulley, Comp Cam, Thrasher 105lb valve spirngs, 160 Tstat, gator back belt
In the closet: Desert Fox, STB's (front, rear), springs
Previous Topic
Index
