No one know where red and white HID plug will go to? I guess ebay seller forgot something. I couldn't figure it out where plug go to.

Just got my summer car out of garage last night. I will drive it few days (warm weather) then storage it back on Sunday.

Can you take a better picture of the whole thing? Your first pic shows the blue adapter that plugs into your stock headlight harness, but not the rest of the wires.

On mine, the two wires with the spade terminals are just dangling, unused. My relay harness is used instead of them. They would be where you would apply power if you are not using a relay harness.

Palsut, those red and black wires go to the blue headlight plug on your car. On the stock wiring harness behind your headlight there is a blue plug. The RED wire will splice into the BEIGE wire and the BLACK wire will splice into the BLACK wire. This is how the ballasts get power from the headlight harness.

OR

On that blue plug harness you have at the bottom of the first picture there may be a blue and a black wire that are female connections that the RED and BLACK wire will plug into. If that is the case you can just plug those in to that and that will go to the stock harness.

More pictures of that blue plug will help.

Thank for info. The blue plug is actually from my new black projector.

I will take better full pictures when I get home. I'm on lunch break.

What red and white you talking about in picture?
The big blug plug plugs into your harness that you disconnect from the stock headlight.
The two wires with the flat terminals, black and red in your picture, you remove the rubber boot on the middle bulb of the projector headlight. You take out that bulb, insert the HID bulb in that hole, and those two terminals plug into the female terminals inside that boot.

Palsut, use that info above and go to page 3 and look at my pictures, you'll understand what I am talking about.

lol I mean black. Not white. I can't believe I say white. Guess I'm pretty beat up for work night shift last night then start morning shift today. I get few hours of sleeping left. After great nap, so I install the plug what you guys told me. I took it to test on my car but not install on it since it is very dark outside. Perfect. Wow, very bright. Nearly blind myself.

I have trouble to how to hold the HID bulb with gold metal thing. I couldn't figure it out how to put it back together where it supposed to be. I look left projector as example that I didn't remove them out yet. I took right projector bulb out then put HID bulb on it.

Ya I got a dose, also, from the bright bulb. Eye was blind for few minutes

The retainer wire just snaps in place with a little effort, as long as you have the bulb fully seated.