CRANKSHAFT PULLEY REMOVAL? - Grand Prix Net

You are not logged in. [Log In] Grand Prix Net » Forums » Older Models » 1997-2003 Grand Prix » CRANKSHAFT PULLEY REMOVAL?

Topic Options

Rate This Topic

#123219 - 07/31/05 11:49 PM

CRANKSHAFT PULLEY REMOVAL?

davyboy Offline

Offline

Junior Member

Registered: 07/31/05
Posts: 6
Loc: Va11:

Does anyone know if you need a pulley remover for the crankshaft pulley on a 1997 Grand Prix? One of my books says you do and another book says one doesn't. By the way I'm replacing the crankshaft position sensor. Thanks

#123220 - 08/01/05 12:00 AM

Re: CRANKSHAFT PULLEY REMOVAL?

zuulmusic Offline

Offline

Member

Registered: 04/22/05
Posts: 3075
Loc: Cleveland, OH

Look's like you'll need to grab a harmonic ballancer puller.
This should help you:
http://mykidz.net/GTP/CrankPosSensor.shtml

#123221 - 08/01/05 06:22 AM

Re: CRANKSHAFT PULLEY REMOVAL?

davyboy Offline

Offline

Junior Member

Registered: 07/31/05
Posts: 6
Loc: Va11:

The guy that's working on my car said he can't find a puller that is big enough(spread out far enough). He tried the one's from the auto stores.

#123222 - 08/01/05 06:23 AM

Re: CRANKSHAFT PULLEY REMOVAL?

HercMan(Rob) Offline

Offline

Member

Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas

You will need it! Keep looking around.

_________________________
http://www.patriotguard.org

#123223 - 08/01/05 09:46 AM

Re: CRANKSHAFT PULLEY REMOVAL?

Kwik Wun Offline

Offline

Member

Registered: 06/29/05
Posts: 84
Loc: Omaha, NE

You don't need to remove the pulley to replace The sensor...it makes it a lot easier once its off...but getting that pulley off was the biggest PITA I have ever encountered while working on my GTP...(Well, the bolt)

_________________________
COMPETITION CAMSHAFT STAGE 2, 105 lb Valve springs, new Pushrods, new retainers, 4" Fenderwell Intake, 3" DP with High-flow Cat, Borla Cat-Back, 3.2" Pulley, Shift Kit, 160 T-stat, DHP PCM 1.0, Tranny Cooler, Taylor Wires, Colder Plugs

#123224 - 08/01/05 04:19 PM

Re: CRANKSHAFT PULLEY REMOVAL?

davyboy Offline

Offline

Junior Member

Registered: 07/31/05
Posts: 6
Loc: Va11:

Job done. Couldn't see the bolt holes deep inside pulley. Thanks for the help.

View All Topics

Moderator: AustinGTP, Chew, HercMan(Rob), Marc Harbison, Redshift