Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#133001 - 01/14/05 03:42 PM K&N air filter kit
Louie Offline
Member
Registered: 01/10/05
Posts: 79
Loc: Goderich Ont. Canada
Hey guys,can anyone tell if it's worth
the 40 bucks to r&r the stock air filter
for one of these k&n filter kits savewave
Top
#133002 - 01/14/05 03:56 PM Re: K&N air filter kit
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
Filter kit??? are you talking about a drop in replacement or a cone or what ? K&N also makes a CAI kit you have to be a little more specific.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#133003 - 01/14/05 03:56 PM Re: K&N air filter kit
TastyBake Offline
Member
Registered: 07/29/04
Posts: 1563
Loc: Ohio
No.

You will only get 3 to 4 actual hp with it which you won't feel at all. When I bought one, I didn't. Just needed cleaning every 40-50k.

Instead, I recommend a Cold Air Induction kit for $200 to get 10 hp. You will notice a difference in throttle response but the car will sound like Darth Vader due to the vacuum is louder. Takes some getting used to but its worth it and you get much better bang for the buck!!

They have them at www.pfyc.com.
_________________________

[GONE]
GenV GTP engine, 12" Brakes, CAI, 3" DP, HighFlo Cat, 180 T-Stat, Aeroforce Gauge, Front STB, Stinger Fiberglass hood, Reflective Graphics.
Top
#133004 - 01/14/05 04:34 PM Re: K&N air filter kit
Louie Offline
Member
Registered: 01/10/05
Posts: 79
Loc: Goderich Ont. Canada
There is one on ebay and all I could find out
was it said gen 2.
Top
#133005 - 01/14/05 04:36 PM Re: K&N air filter kit
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
Link?
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#133006 - 01/14/05 04:47 PM Re: K&N air filter kit
Louie Offline
Member
Registered: 01/10/05
Posts: 79
Loc: Goderich Ont. Canada
If you go on ebay.ca type 97 grand prix
it's on the first page for 48.96 Canadian.
Top
#133007 - 01/14/05 04:52 PM Re: K&N air filter kit
TastyBake Offline
Member
Registered: 07/29/04
Posts: 1563
Loc: Ohio
Cut and paste the link. I don't see it.
_________________________

[GONE]
GenV GTP engine, 12" Brakes, CAI, 3" DP, HighFlo Cat, 180 T-Stat, Aeroforce Gauge, Front STB, Stinger Fiberglass hood, Reflective Graphics.
Top
#133008 - 01/14/05 04:59 PM Re: K&N air filter kit
Louie Offline
Member
Registered: 01/10/05
Posts: 79
Loc: Goderich Ont. Canada
Top
#133009 - 01/14/05 05:13 PM Re: K&N air filter kit
TastyBake Offline
Member
Registered: 07/29/04
Posts: 1563
Loc: Ohio
The pic shows a CAI kit but it looks like you are just getting the Cone Filter, which is incomplete.

Still recommend getting a CAI kit somewhere else. This way you get everything. Plus kits have enclosures for the cone filter so it doesn't sucking in hot air, which defeats the purpose.
_________________________

[GONE]
GenV GTP engine, 12" Brakes, CAI, 3" DP, HighFlo Cat, 180 T-Stat, Aeroforce Gauge, Front STB, Stinger Fiberglass hood, Reflective Graphics.
Top
#133010 - 01/14/05 05:19 PM Re: K&N air filter kit
BlackHawkGTP Offline
Member
Registered: 09/05/04
Posts: 75
Loc: San Angelo, Texas
I wouldnt get that one on ebay you showed, it didnt even have the hole for the air sensor, kinda cheap.
_________________________
"The Black Hawk" 97 Grand Prix GTP, Fenderwell intake, K&N Filters, Flowmaster exhaust, oil cooler, Performance Sparkwires, 3.5 pulley, moved coolant tower, u-bend removed, 180 thermo stat, colder plugs
Top
#133011 - 01/14/05 05:20 PM Re: K&N air filter kit
Louie Offline
Member
Registered: 01/10/05
Posts: 79
Loc: Goderich Ont. Canada
Thanks for info, I will look into that.
Top
#133012 - 01/14/05 06:14 PM Re: K&N air filter kit
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
For the price its not bad,it includes a aluminum intake tube and a K&N filter ,but it's certainly not a CAI but you could build a box to isolate it,like i said for $40 not bad compaired to most cai on the market for over $200,and Blackhawk look close it has the sensor plugged in.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#133013 - 01/16/05 05:22 AM Re: K&N air filter kit
HercMan(Rob) Offline
Member
Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas
On my open cone intake I noticed a 5 mpg increase on the highway.
_________________________
http://www.patriotguard.org
Top
#133014 - 01/16/05 06:25 AM Re: K&N air filter kit
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
since you do'nt have any sig.(it's very hard to give advice witthout car year model& mods) i will say that because the K&N flows well and you will be getting a fairly straight shot at the throttle body with the kit your looking at you will have noticeable throttle gains, though not ideal a open cone is an improvement over stock because of the sheer volume of air moved,ideally the air should be at ambiant temp.especially with N/A applications,but as mentioned before its not that difficult to build a box for your system.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#133015 - 01/16/05 09:12 AM Re: K&N air filter kit
AustinGTP Offline
Member
Registered: 05/23/03
Posts: 8078
Loc: Austin, TX
Quote:
Originally posted by Chico:
but as mentioned before its not that difficult to build a box for your system.
I agree! Save your $200 and build your own box.
Spend the money you saved on a U-bend delete, plugs and wires, mufflers, or something else.
_________________________
Bobby

Died 5/1/08, resurrected 5/15/08
ASCD SD hood, 17" Bullitts, Overkill PCM, 3.4" Pulley, NGK TR55IX, K&N 9" cone filter, JimmyC D/P, U-bend removed, Flowmaster 40 series, Hooker big bore tips with resonators, S/B brake lines, drilled/slot rotors, GMPP handling kit, KYB struts, F&R strut supports, HID's, LED's, 2.5" Air Dam, red GTP overlays on custom badges, white rear insert.
Top
#133016 - 01/17/05 10:19 PM Re: K&N air filter kit
89GrandPrix SE Offline
Junior Member
Registered: 01/16/05
Posts: 11
Loc: Chambersburg, PA 17201
Can the cold air induction kits bet bought to fit the 1989 Grand Prix SE... 2.8 Liter engines...?

If anyone has any info on it, please LMK... (that darth vader sound is awesome (IMO)
_________________________
Tim Bonner
glassfabricant@gmail.com
Top
#133017 - 01/18/05 04:30 AM Re: K&N air filter kit
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
Just look on E-bay they have hundreds of them ,i imagine any thing that would work on the 3.1 would work on the 2.8.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#133018 - 01/19/05 12:53 AM Re: K&N air filter kit
89GrandPrix SE Offline
Junior Member
Registered: 01/16/05
Posts: 11
Loc: Chambersburg, PA 17201
Chico, thanx for your advise...

I found and purchased a set up... Made spacifically for a 2.8, or 3.1 prix...

Heres another 1 i found but its for a 3800... Just a heads up is anyones looking for one...

http://www.grandprix.net/cgi-bin/ultimatebb.cgi?ubb=get_profile;u=00001776

Thanx again...
_________________________
Tim Bonner
glassfabricant@gmail.com
Top
#133019 - 01/19/05 05:18 AM Re: K&N air filter kit
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
WTF ,89 Grandprix you put a link to my profile???
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#133020 - 01/19/05 08:28 AM Re: K&N air filter kit
AustinGTP Offline
Member
Registered: 05/23/03
Posts: 8078
Loc: Austin, TX
lol lol
...whoops!
_________________________
Bobby

Died 5/1/08, resurrected 5/15/08
ASCD SD hood, 17" Bullitts, Overkill PCM, 3.4" Pulley, NGK TR55IX, K&N 9" cone filter, JimmyC D/P, U-bend removed, Flowmaster 40 series, Hooker big bore tips with resonators, S/B brake lines, drilled/slot rotors, GMPP handling kit, KYB struts, F&R strut supports, HID's, LED's, 2.5" Air Dam, red GTP overlays on custom badges, white rear insert.
Top
#133021 - 01/23/05 01:01 PM Re: K&N air filter kit
89GrandPrix SE Offline
Junior Member
Registered: 01/16/05
Posts: 11
Loc: Chambersburg, PA 17201
Quote:
Originally posted by Chico:
WTF ,89 Grandprix you put a link to my profile???
SHAT !

I dunno how that happen, I've never even been to that link myself... Sorry about that... lol

That was supposed to be an Ebay link... ::raises eyebrow::

umm, I guess either the admin is playing a joke on me (doubtful) or, thats my bad...
_________________________
Tim Bonner
glassfabricant@gmail.com
Top
#133022 - 02/02/05 01:55 AM Re: K&N air filter kit
89GrandPrix SE Offline
Junior Member
Registered: 01/16/05
Posts: 11
Loc: Chambersburg, PA 17201
I just recieved one today I got on Ebay.. Not K&N but it seems to be a good investment... espically over the stock air filter... I got it installed... the breather hose is temporary, till I get one that 1 looks better... Whistles a little bit laugh

I'll snap a few pictures later

It's on a 2.8 auto, in an 89 Grand Prix SE
_________________________
Tim Bonner
glassfabricant@gmail.com
Top
#133023 - 02/02/05 07:18 AM Re: K&N air filter kit
HercMan(Rob) Offline
Member
Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas
The open cone is much louder then the stock airbox. GM keeps the airboxes quiet so grandma don't complain that her car is too noisey.
_________________________
http://www.patriotguard.org
Top
#133024 - 02/02/05 01:08 PM Re: K&N air filter kit
TastyBake Offline
Member
Registered: 07/29/04
Posts: 1563
Loc: Ohio
Scion have CAI available as a TRD option. All other manufactures use their standard boxes.

Companies have to weigh different factors.
Neighborhood Noise Pollution + Customer Complaints + not 100% proven dirt filtration + gain 5-7 HP + loose 1 mpg.

vs.

Quieter + customer needs to keep purchasing filters + loss potential HP + conservative mpg.
_________________________

[GONE]
GenV GTP engine, 12" Brakes, CAI, 3" DP, HighFlo Cat, 180 T-Stat, Aeroforce Gauge, Front STB, Stinger Fiberglass hood, Reflective Graphics.
Top
Page 1 of 2 1 2 >