#149177 - 06/21/05 10:09 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 05/23/03
Posts: 8078
Loc: Austin, TX
|
|
I just cleaned them real good with brake cleaner, but I didn't get the pass side good enough, it's starting to chip off. It's lasted about a year. I need to get some more and do a touch up. I didn't paint my brackets, I just painted the calipers. I actually painted the brackets when I did my rotors. I removed and spray painted the brackets a flat black. As for the calipers, I just brushed where I could get, front side, top side and the front and back leading edges. Pretty much just painted what you could see. If you remove my calipers you would see that the back side is not painted. I like G2 because of its durability. You could squirt brake fluid on it and it won't effect it one bit.
If I were to do it again I would use a scuff pad along with brake cleaner, and maybe my Dremel with a wire brush if needed.
_________________________
Bobby Died 5/1/08, resurrected 5/15/08 ASCD SD hood, 17" Bullitts, Overkill PCM, 3.4" Pulley, NGK TR55IX, K&N 9" cone filter, JimmyC D/P, U-bend removed, Flowmaster 40 series, Hooker big bore tips with resonators, S/B brake lines, drilled/slot rotors, GMPP handling kit, KYB struts, F&R strut supports, HID's, LED's, 2.5" Air Dam, red GTP overlays on custom badges, white rear insert.
|
Top
|
|
|
|
#149178 - 06/21/05 10:38 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 07/15/04
Posts: 3141
Loc: Chicago, IL
|
|
And don't forget some good ole elbow grease.
_________________________
DHP V1.0, Slotted rotors, S/S Brake Lines, Custom CAI, GMPP Handling Kit, KYB's, Jimmy C DP (U-Bend delete w/ Hi-flow cat), Flowmaster Super 40's, drilled 180° T-Stat, Alt. Rewire & Alt. Voltage Booster Combo, 605's, ZZP Motor Mounts
"The only difference between me and a madman is that I am NOT mad!" - Dali
|
Top
|
|
|
|
#149179 - 07/05/05 09:40 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 11/24/04
Posts: 53
Loc: Indiana
|
|
_________________________
Meressa Custom Intake, Autolite 104s, 180* T-stat, Clear Corners, Custom Grilles, Pulley Boys 3.4 Pulley, Gauges, Angel Eye Fogs, DHP 1.0v PCM, 3" DP and cat & u-bend delete...
|
Top
|
|
|
|
#149180 - 07/05/05 10:19 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 08/09/03
Posts: 3256
Loc: Oregon
|
|
So THAT is what my redfire GTP looks like underneath all the dirt!
Nice clean job. If I ever finish the yardwork I will have to give mine a bath too.
|
Top
|
|
|
|
#149181 - 07/05/05 11:41 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 07/04/05
Posts: 187
Loc: Kuwait/Iraq
|
|
|
Top
|
|
|
|
#149182 - 07/05/05 12:36 PM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 03/26/03
Posts: 2481
Loc: Franklin, MA
|
|
|
Top
|
|
|
|
#149183 - 07/05/05 01:24 PM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 11/24/04
Posts: 53
Loc: Indiana
|
|
Originally posted by BryantGTP: Who's R1 in the garage? Oh!!! That ol' thing...it's mine!!! No, not really it's my b/f's Champion Edition R1
_________________________
Meressa Custom Intake, Autolite 104s, 180* T-stat, Clear Corners, Custom Grilles, Pulley Boys 3.4 Pulley, Gauges, Angel Eye Fogs, DHP 1.0v PCM, 3" DP and cat & u-bend delete...
|
Top
|
|
|
|
#149184 - 07/05/05 10:50 PM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 04/09/05
Posts: 225
Loc: Gananoque, ON, Canada
|
|
Beautiful job 01, nice looking car
_________________________
CAI, Flowmaster 40s, Magnaflow cat, u-bend delete, Eibach springs, 16" American Racing rims way more to come
|
Top
|
|
|
|
#149185 - 07/05/05 11:20 PM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 05/23/03
Posts: 8078
Loc: Austin, TX
|
|
Originally posted by 01redfireGTP: Is that the exhaust pipe coming out of the bed of that truck, or is it a vent pipe coming out of the bldg???
_________________________
Bobby Died 5/1/08, resurrected 5/15/08 ASCD SD hood, 17" Bullitts, Overkill PCM, 3.4" Pulley, NGK TR55IX, K&N 9" cone filter, JimmyC D/P, U-bend removed, Flowmaster 40 series, Hooker big bore tips with resonators, S/B brake lines, drilled/slot rotors, GMPP handling kit, KYB struts, F&R strut supports, HID's, LED's, 2.5" Air Dam, red GTP overlays on custom badges, white rear insert.
|
Top
|
|
|
|
#149186 - 07/06/05 01:44 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 11/17/04
Posts: 712
Loc: Kansas (Redneck Country)
|
|
Bobby: It loks like it's the exhaust... my father in law's 97 3/4 ton dodge has a 5" coming out of the same place in his. it looks like a semi pulling a heavy load up a big hill when he ets on it and makes it smoke..... Freakin' awesome and it looks cool. you should see how many people look at it like "WTF is that thing?!?!?!?!"
_________________________
98 GTP GMPP handling kit, HomemadeFWI, MSD coils, Taylor wires, 180 drilled tstat, TR6IX plugs, Intense STD PCM, JimmyC DP, Thrasher shift kit (mild setting), AGX/Intrigue spring setup, drilled/slotted rotors with Hawk HPS pads. Hopefully more to come
|
Top
|
|
|
|
#149187 - 07/06/05 09:08 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 11/24/04
Posts: 53
Loc: Indiana
|
|
Originally posted by Austin G T P: Originally posted by 01redfireGTP: [b] Is that the exhaust pipe coming out of the bed of that truck, or is it a vent pipe coming out of the bldg??? [/b]It's his exhaust...his is 7" and it pours the sooty black smoke w/the help of twin turbos. A monster of a truck imo...
_________________________
Meressa Custom Intake, Autolite 104s, 180* T-stat, Clear Corners, Custom Grilles, Pulley Boys 3.4 Pulley, Gauges, Angel Eye Fogs, DHP 1.0v PCM, 3" DP and cat & u-bend delete...
|
Top
|
|
|
|
#149188 - 07/06/05 03:15 PM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 07/08/04
Posts: 652
Loc: Imperial MO
|
|
Haha, screw the GP, I'll take the truck!! Twin turbos, dear lord. That would be so much fun to eat rice in!
_________________________
-Dan- SOLD-1998 Grand Prix GT with 148K. Infinity Reference 5.25s, Pioneer 4 way 6x9s, Yokohama AS430s, Open cone K&N intake, Front strut bar,180* Powerstat, Dual glasspack mufflers w/ removed resonator, and painted under-hood components.-SOLD- 1995 Eagle Talon TSi AWD - 81K, 3" turbo-back exhaust, open cone intake, hard IC piping, boost controller, GReddy Type-S BOV, more to come.
|
Top
|
|
|
|
#149189 - 07/06/05 03:35 PM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 11/24/04
Posts: 53
Loc: Indiana
|
|
Originally posted by nad: Haha, screw the GP, I'll take the truck!! Twin turbos, dear lord. That would be so much fun to eat rice in! He not only eats ricers for breakfast he also covers them in soot as he's flyin' by them...
_________________________
Meressa Custom Intake, Autolite 104s, 180* T-stat, Clear Corners, Custom Grilles, Pulley Boys 3.4 Pulley, Gauges, Angel Eye Fogs, DHP 1.0v PCM, 3" DP and cat & u-bend delete...
|
Top
|
|
|
|
#149190 - 07/13/05 05:04 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 03/11/05
Posts: 136
Loc: Madison, WI
|
|
here's mine after a thourough washing and waxing (yep, waxed the wheels too) at a mini WICGP meet (there were 3 of us and 4 cars... one of them had a 97 GT and 97 GTP (the red one w/ the SLP spoiler in the background), but he now has the GT and a 96 Corvette)
_________________________
Galaxy Silver Metallic 2001 GT ~ 70k miles Eclipse CD5425 deck, Eclipse & Kenwood speakers, Silverstars, rear bumper inlays, debadged, Flowmaster Super 40s and Gibson tips
|
Top
|
|
|
|
#149191 - 07/13/05 08:34 AM
Re: Going along with Canadian and Austin ..
|
Member
|
Registered: 05/23/03
Posts: 8078
Loc: Austin, TX
|
|
Looks good!
_________________________
Bobby Died 5/1/08, resurrected 5/15/08 ASCD SD hood, 17" Bullitts, Overkill PCM, 3.4" Pulley, NGK TR55IX, K&N 9" cone filter, JimmyC D/P, U-bend removed, Flowmaster 40 series, Hooker big bore tips with resonators, S/B brake lines, drilled/slot rotors, GMPP handling kit, KYB struts, F&R strut supports, HID's, LED's, 2.5" Air Dam, red GTP overlays on custom badges, white rear insert.
|
Top
|
|
|
|
|
|