Well, in tearing down my L67, the coolant elbow in the intake was damaged. I was gentle, but it separated at the o-ring and left a portion in the intake. This left me having to get a replacement and ZZP is pretty high. I thought we had carried these at work before so I went looking, sure enough there they were. Two in a pack (upper and lower) for $3.99 in the Help section. Beats the pants of ZZP's $6.99 and $8.99 EACH!

Here's the part number: 47065

Good find!!!

I always tell people to have replacements for those ells when removing the LIM, and in a lot of cases the alternator bracket needs to be removed just to change valve cover gaskets.
If you need to pull the alternator bracket, have some replacement Ells available.

i broke both of mine, and just used RTV around them. worked out ok, but i didnt want to spend what ZZP wanted.

Thanks Rook!

Where is the lower coolant elbow? I had my entire motor in pieces and I don't remember seeing it? Maybe I am just retarded. I bought the upper one from ZZP anyways...

I think like 6-10 inches below the upper.

Well, going off what I know about the GTP's, the 97-98's don't have the lower coolant elbow. On the '99+ there are 2 plastic Ells.

Hmm... well my bottom end and most of the accessories are 97.. so that would make sense.