Page 3 of 3 < 1 2 3
Topic Options
Rate This Topic
#216764 - 11/14/11 08:00 PM Re: Relay harness for HID kit [Re: 20gtp02]
20gtp02 Offline
Member
Registered: 04/13/06
Posts: 6709
That was what I was waiting for.
I figured this is what you were meaning but it wasn't coming across clearly.
Doesn't make sense that you have to rewire something to make it work in this way.
I figured the wires needed to be switched.

I would like to see pictures of peoples light output with HIDs or projectors from inside the car.
Because mine light up the road like crap.
_________________________

2002
Top
#216770 - 11/14/11 11:00 PM Re: Relay harness for HID kit [Re: 20gtp02]
r.s.hutchinson Offline
Member
Registered: 01/01/08
Posts: 3900
Loc: Ontario, Canada
If the harness is the exact link you posted, it's a 9004/9007 harness and I see them mixed up all the time.

Did you get it straightened out and working correctly now? I'll draw a pic if you didn't.

My 1 projector was weird and the cutoff was backwards. Quite annoying but was still huge improvement over stock. I don't have any pics and the car is demodded now so can't help ya there. Sorry.
_________________________
00 Turbo GTP - 97 GTP - 03 GSXR600
Top
#216778 - 11/15/11 07:26 PM Re: Relay harness for HID kit [Re: 20gtp02]
20gtp02 Offline
Member
Registered: 04/13/06
Posts: 6709
No I haven't been able play with it again.
I probably going tinker around with cutoffs too.
Thanks for the help.
Sucks we have to fabricate to the parts to make them
Work.
_________________________

2002
Top
#217244 - 02/07/12 04:40 PM Re: Relay harness for HID kit [Re: 20gtp02]
20gtp02 Offline
Member
Registered: 04/13/06
Posts: 6709
I finally tackled this today.
It works.
Poor built products and design are of cause.

Randall, I also had one cutoff turned opposite than the other.
You said you took yours out?
What is the purpose of the cutoffs?
I had one with the round edge up and the other with the sharp
edge up.
Which is correct?
I just want the road lite up, and ever since getting the HIDs and projectors, I don't see the road very well.

Right now I took out the cutoffs, to experiment.
_________________________

2002
Top
#217245 - 02/07/12 06:20 PM Re: Relay harness for HID kit [Re: 20gtp02]
RooK Offline
Member
Registered: 03/07/05
Posts: 5158
Loc: Southern KY
Cutoffs are cutoffs. They cut the light off at a specific point so you can aim them without glare going above that. Regular halogen lamps have a flat point where the light kinda stops, but it still spills above it. Cutoffs stop the light period and are what create the solid line of light/no light that shows in your beam pattern. High beam usage should be the only occurrence of no cutoff with projectors and HIDs especially.
_________________________
'13 Mustang 3.7V6 - MT82
'00 GP SE (L67 Swap, XP, Headers, 3.25")
'98 GTP, '01 Bonne
Top
#217257 - 02/09/12 09:37 AM Re: Relay harness for HID kit [Re: 20gtp02]
20gtp02 Offline
Member
Registered: 04/13/06
Posts: 6709
Eh, finally got to see the road this morning.
On my way to work at 1:45 am, I was able to turn the
screw on one headlight to even out the pattern of both,
enabling a nice view of the road way.
Finally after a year of laziness and poor visibility I can
see.
_________________________

2002
Top
Page 3 of 3 < 1 2 3