Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#22719 - 05/16/07 10:12 PM Got some stuff done.
Fiin Offline
Member
Registered: 05/11/07
Posts: 43
Loc: Toronto, Ont.
So today seemed to be VE-Day for my car. She went in for her exaust work around 10 30 am, got a custom bent 3" DP, Magnaflow highflow cat and the U-Bend delete done.

Then at work around 12 30 my phone rings and it Purolator with my CAI. So after work I pull her in and slap that in (20 mins my butt for a first timer! :p ), changed my fuel filter, doing my PCV tomorrow and hear back on Friday about a custom PCM tune.

Overall, a good day I would say for me GP! I didnt notice a heck of alot of difference with just the exaust done driving it from the shop to my work, except it sounded meaner, but now the CAI is in I can really feel and hear it in the low end.

Guess now its probably PCM time, and maybe a 3.5 pulley, havent decided yet on that one.
_________________________
http://www.rbcroyalbank.com/RBC:RkdJo471JsUAAj4MWLI/cgi-bin/travel/fxconvert.pl
Currency Calc.

K&N CAI, custom 3" Dp, U bend delete, resinator removed. high flow cat, 3.5" pulley, incar Overkill PCM tune, 180* tstat.
Top
#22720 - 05/17/07 12:06 AM Re: Got some stuff done.
ordonez1307 Offline
Member
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
well, if you left the stock mufflers in, then there wont be too much of a difference in sound. But im sure that you felt more responsiveness from the car
_________________________
Corey Smith
Top
#22721 - 05/17/07 01:41 AM Re: Got some stuff done.
lonezergling Offline
Member
Registered: 12/27/06
Posts: 2159
Loc: Waterford, WI
Twisting the dogbone mounts 90* will REALLY make your car feel like everything is lined up better.

All the shifts feel tighter and shorter.

I still suprise myself in thinking that the little jolt from a shift is longer that it is now.
_________________________

http://s4.photobucket.com/albums/y130/venomman/
"If you are asking if you can do it, you can't. When you have learned enough to know that you can do it, you are able to." -me
Top
#22722 - 05/17/07 05:53 AM Re: Got some stuff done.
Fiin Offline
Member
Registered: 05/11/07
Posts: 43
Loc: Toronto, Ont.
Yah Ordonez, I left the mufflers in, I didnt expect too much doing that. I am actually pretty happy with the sound atm to be honest.

I'll give that a shot Zergling, sounds like a neat mod, thanks!
_________________________
http://www.rbcroyalbank.com/RBC:RkdJo471JsUAAj4MWLI/cgi-bin/travel/fxconvert.pl
Currency Calc.

K&N CAI, custom 3" Dp, U bend delete, resinator removed. high flow cat, 3.5" pulley, incar Overkill PCM tune, 180* tstat.
Top
#22723 - 05/17/07 08:30 AM Re: Got some stuff done.
zuulmusic Offline
Member
Registered: 04/22/05
Posts: 3075
Loc: Cleveland, OH
When I did the downpipe and hi-flow cat I could really hear the difference, inside and out. Stock muffs.
Top
#22724 - 05/17/07 01:20 PM Re: Got some stuff done.
BLEWGTP Offline
Member
Registered: 09/26/06
Posts: 691
Loc: Philadelphia, PA
i did the 2.5" cat back with no res and flows for muffs, but i didnt feel any diff...i guess ubend and d/p will help that...
_________________________
03 GTP: 06 seats-roof rails-fbody brakes-limited edition gauges-slp spoiler-gmpp exhaust-06 vette tips-
Top
#22725 - 05/17/07 02:05 PM Re: Got some stuff done.
ordonez1307 Offline
Member
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
Quote:
Originally posted by BLEWGTP:
i did the 2.5" cat back with no res and flows for muffs, but i didnt feel any diff...i guess ubend and d/p will help that...
youre not going to feel any difference from just a cat-back with the u-bend left in there, that is primarily for sound. The DP and u-bend with some headers or PEMS will help the performance aspect
_________________________
Corey Smith
Top
#22726 - 05/17/07 08:43 PM Re: Got some stuff done.
Fiin Offline
Member
Registered: 05/11/07
Posts: 43
Loc: Toronto, Ont.
One thing I have noticed since the exaust and CAI work, my mileage seems to move around alot more now,is that normal?

I was living at 17.8 mpg, now I float between 17.4 and 19ish.
_________________________
http://www.rbcroyalbank.com/RBC:RkdJo471JsUAAj4MWLI/cgi-bin/travel/fxconvert.pl
Currency Calc.

K&N CAI, custom 3" Dp, U bend delete, resinator removed. high flow cat, 3.5" pulley, incar Overkill PCM tune, 180* tstat.
Top
#22727 - 05/17/07 08:48 PM Re: Got some stuff done.
drummerboy1307 Offline
Member
Registered: 04/30/06
Posts: 3201
Loc: Groton, CT
Well... that depends. Have your driving habits changed as a result of the intake and exhaust?

devilgrin
_________________________

'97 SE with alot of mods
Top
#22728 - 05/17/07 09:08 PM Re: Got some stuff done.
Fiin Offline
Member
Registered: 05/11/07
Posts: 43
Loc: Toronto, Ont.
Sadly lol, not overly.. I still mostly drive like a grandma :p
_________________________
http://www.rbcroyalbank.com/RBC:RkdJo471JsUAAj4MWLI/cgi-bin/travel/fxconvert.pl
Currency Calc.

K&N CAI, custom 3" Dp, U bend delete, resinator removed. high flow cat, 3.5" pulley, incar Overkill PCM tune, 180* tstat.
Top
#22729 - 05/19/07 06:58 AM Re: Got some stuff done.
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
The Dp with U-bend delete will give you some performance gain but if your looking for a different sound you will have to get rid of those stock(heavy) muffs,choose these carefully .Chico.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#22730 - 05/19/07 07:01 PM Re: Got some stuff done.
Fiin Offline
Member
Registered: 05/11/07
Posts: 43
Loc: Toronto, Ont.
Right now we are looking at Flow 40s or maybe modding on a Magnaflow. My exaust guy said he modded a Magna onto one before and it sounded killer, so we are trying to track him down so we can have a listen to see if I like it.
_________________________
http://www.rbcroyalbank.com/RBC:RkdJo471JsUAAj4MWLI/cgi-bin/travel/fxconvert.pl
Currency Calc.

K&N CAI, custom 3" Dp, U bend delete, resinator removed. high flow cat, 3.5" pulley, incar Overkill PCM tune, 180* tstat.
Top
#22731 - 05/19/07 07:30 PM Re: Got some stuff done.
drummerboy1307 Offline
Member
Registered: 04/30/06
Posts: 3201
Loc: Groton, CT
If you go with flowmasters, leave the resonator in place! They sound raspy if you take it out.
_________________________

'97 SE with alot of mods
Top
#22732 - 05/19/07 09:17 PM Re: Got some stuff done.
Fiin Offline
Member
Registered: 05/11/07
Posts: 43
Loc: Toronto, Ont.
Hrmm, those Magnas looking abit better then heh, I pulled my res already smirk
_________________________
http://www.rbcroyalbank.com/RBC:RkdJo471JsUAAj4MWLI/cgi-bin/travel/fxconvert.pl
Currency Calc.

K&N CAI, custom 3" Dp, U bend delete, resinator removed. high flow cat, 3.5" pulley, incar Overkill PCM tune, 180* tstat.
Top
#22733 - 05/20/07 12:48 AM Re: Got some stuff done.
Chico Offline
Member
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
What modding are you talking about on the MF's? I'm running MF's and they did'nt require any modification,but I really do like the sound much better then FM's a more mellow sound IMHO.Chico.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
Page 1 of 2 1 2 >