You are not logged in. [Log In] Grand Prix Net » Forums » Older Models » 1997-2003 Grand Prix » ZZP modular pulley system
Register User    Forum List        Calendar     Active Topics     FAQ
Topic Options
Rate This Topic
#39085 - 02/15/05 08:24 PM ZZP modular pulley system
2fast4u Offline
Member 		Registered: 11/05/04
Posts: 2108
Loc: Livonia, MI
Hey guys, i finaly got some money together and im thinking about the zz modular pulley system, its about $130, I was wondering if that whould be a good first mod. or if i should go with something else first.
Thanks
Brad
p.s. how much boost will my car make with a 3.4 pulley on it and how much boost do you get when the pulley is stock.
_________________________
98 Gtp coupe

Mods: 11.87@115 strictly stock
http://videos.streetfire.net/video/98-GTP-burnout_207724.htm
Top
#39086 - 02/15/05 08:47 PM Re: ZZP modular pulley system
AustinGTP Offline
Member 		Registered: 05/23/03
Posts: 8078
Loc: Austin, TX
What mods do you currently have?
For a pulley you'll want to include a few supporting mods.
CAI
U-bend delete
3" DP wouldn't hurt

You want it to breath as easy as possible, and cool it down a little to help fight KR.
180* stat
1* cooler plugs
A PCM will really help everything works nice together
_________________________
Bobby

Died 5/1/08, resurrected 5/15/08
ASCD SD hood, 17" Bullitts, Overkill PCM, 3.4" Pulley, NGK TR55IX, K&N 9" cone filter, JimmyC D/P, U-bend removed, Flowmaster 40 series, Hooker big bore tips with resonators, S/B brake lines, drilled/slot rotors, GMPP handling kit, KYB struts, F&R strut supports, HID's, LED's, 2.5" Air Dam, red GTP overlays on custom badges, white rear insert.
Top
#39087 - 02/15/05 09:08 PM Re: ZZP modular pulley system
2fast4u Offline
Member 		Registered: 11/05/04
Posts: 2108
Loc: Livonia, MI
im stock, I thought id be fine with a 3.4 like i whouldent have to fight KR. and it doesent get as hot in MI as it does in TX. wink
_________________________
98 Gtp coupe

Mods: 11.87@115 strictly stock
http://videos.streetfire.net/video/98-GTP-burnout_207724.htm
Top
#39088 - 02/15/05 09:26 PM Re: ZZP modular pulley system
HercMan(Rob) Offline
Member 		Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas
You will be fine but you really should have some supporting mods at a minimum some kind of CAI, U bend delete and a 180* Tstat. 3.8 pulley is about 6 psi. 3.4 pulley is about 8-11 psi.
_________________________
http://www.patriotguard.org
Top



Moderator:  AustinGTP, Chew, HercMan(Rob), Marc Harbison, Redshift 
Board Rules · Mark all read
Contact Us · Grand Prix Net · Top