Just got done replacing all 5 lug bolts on the aft right of Colleen. To get the lugs off, you HAVE to remove the hub from the brake/hub assy. Heres what you do:
Remove tire with 19mm socket
Remove brake caliper bolts with 15mm socket
Remove brake pad mounting bolts with 13mm socket
Remove brake rotor
On the inboard side of the brake/hub assy, remove e-brake return spring and e-brake control cable and ABS/Trac sensor connector
Using the holes milled into the hub face, remove 4 10mm hub mounting bolts
Remove hub/brake assy
On inboard side of hub/brake assy, find 2 Torx bolts. Remove Torx bolts to separate hub and e-brake assy's
To remove lug bolts, use a short, heavy sledge hammer to pound old bolts out and new bolts in. Be careful not to pound lug bolts in against splines or crooked
Installation is reverse of removal. Torque spec on lug nuts is 135ft/lbs.
Search words:
rear hub tech article write-up rear brake replacement
_________________________
WizAire CAI w/9" K&N & HV3, 2.5" d/p w/h/f cat, Cobra CB, PowerSlot slots w/Hawk HPS, GR-2s, GMPP handling kit, NextLevel STBs, Pilot Sport A/S Plus tires.
98 L36/MM5
RaC