You are not logged in. [Log In] Grand Prix Net » Forums » Older Models » 1997-2003 Grand Prix » New Pulley!!
Register User    Forum List        Calendar     Active Topics     FAQ
Page 2 of 2 < 1 2
Topic Options
Rate This Topic
#51280 - 05/16/07 08:55 AM Re: New Pulley!!
bluegtp91 Offline
Member 		Registered: 04/09/07
Posts: 32
Loc: Liberty, Missouri
I know...its a temporary fix. When I get paid in a couple days I am gonna order my ZZP PCM. Also, what plugs should I go with??
_________________________
2003 GTP w/ Custom CAI, U-Bend and Resonator delete, custom 3" exhaust w/ Flowmaster 40's, ZZP 3.5" pulley, ZZP TB spacer and heat shield, NGK TR6's, and ZZP PCM
Top
#51281 - 05/19/07 07:23 AM Re: New Pulley!!
Chico Offline
Member 		Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
I would suggest NGK TR6 plugs for your application,and if you have'nt installed that press on pulley I would seriously reconsider a modular setup,down the road you will thank me next on your list should be a 3" DP to take advantage of your setup,you will find as you go farther along in modding that individual mods piggyback off of each other.Chico.
_________________________
04 GTO stock,04 Titan,97 GP GT too many mods to list,90 Corvette & project cars, http://photobucket.com/albums/v206/chico1319
Top
#51282 - 05/19/07 03:21 PM Re: New Pulley!!
Kev-GTP Offline
Member 		Registered: 12/29/05
Posts: 724
Loc: Dallas, Tx
Thats why I am only gonna run a 3.5" w/ 3" D/P, colder plugs, colder T-stat, and a new PCM. I might be able to get away with a 3.4", but why risk it? Plus I think I'll be going plenty fast by then.
_________________________
---Kevin
Top
Page 2 of 2 < 1 2



Moderator:  AustinGTP, Chew, HercMan(Rob), Marc Harbison, Redshift 
Board Rules · Mark all read
Contact Us · Grand Prix Net · Top