Topic Options
Rate This Topic
#59369 - 04/29/08 11:11 PM Im going to replace the blower motor resistor tommorow!
Dre da GP man Offline
Member
Registered: 06/12/06
Posts: 2694
Loc: Alexandria, Virginia
Im getting tired of putting my heat/AC on 3,4,5 and it makes me mad that I can't use 1,2. I found some instructions on clubgp on how to change the blower motor resistor. Looks real easy according to the clubgp instructions but I will see. Hope I don't mess anything up as always.


I need to know which one to buy. Here are some links. I want the cheap one because I think this part doesn;t matter far as price but I still want to know which one ya'll think is a better buy. And do I need any tools to get this things off other than a screw driver.

http://www.partsamerica.com/ProductList.aspx?PartType=861&PTSet=A

http://www.autozone.com/R,APP1104193/vehicleId,2741101/initialAction,partProductDetail/store,5298/partType,01160/shopping/partProductDetail.htm
_________________________
Exterior- stock painted black wheels, clear corners, stainless steel grill, cross and drilled front and rear rotors with evolution brake pads.
Coming soon- 18 inch black mustang bullet rims, GT/GTP rear bumper, tinted windows.
Top
#59370 - 04/29/08 11:13 PM Re: Im going to replace the blower motor resistor tommorow!
RooK Offline
Member
Registered: 03/07/05
Posts: 5158
Loc: Southern KY
Make sure you have a 1/4" ratchet for the bolt with a u-joint. That one next to the carpet is a pain.
_________________________
'13 Mustang 3.7V6 - MT82
'00 GP SE (L67 Swap, XP, Headers, 3.25")
'98 GTP, '01 Bonne
Top
#59371 - 04/30/08 08:48 AM Re: Im going to replace the blower motor resistor tommorow!
72chevman Offline
Member
Registered: 09/27/07
Posts: 1575
Loc: Where Dorthy,Toto & Wicked Wit...
you need a 5.5mm 1/4" socket.
_________________________
03 GT, STB, GM HD sway bars, 35% tint, GE893(37watt)fogs, Flowtech Terminators, 180 T-stat, ZZP DP & PCM, Ceramic PLOG & Crossover, 18" glasspack, 2007 17" Mustang Bullits 235/55/17 Pirelli PZero Nero, 12" R1 D\S rotors, gutted air box, GTP radiator
Top
#59372 - 04/30/08 12:28 PM Re: Im going to replace the blower motor resistor tommorow!
20gtp02 Offline
Member
Registered: 04/13/06
Posts: 6709
And a back brace, and some beers to become flexbile! Good luck!
_________________________

2002
Top
#59373 - 04/30/08 10:56 PM Re: Im going to replace the blower motor resistor tommorow!
Dre da GP man Offline
Member
Registered: 06/12/06
Posts: 2694
Loc: Alexandria, Virginia
I bought the resistor for 20 dollars but haven't put it on because I had to make a long drive somewhere and I was tired afterwards plus when I seen gas prices a 3.60 a gallon. I went blank and went to sleep.


Quote:
Originally posted by 20gtp02:
And a back brace, and some beers to become flexbile! Good luck!
Beers I will need but I figure if I lay flat on my back inside the car and put my legs on the chair, I shouldn't need a brace.(Already 2 steps ahead of you 20gtp wink )
_________________________
Exterior- stock painted black wheels, clear corners, stainless steel grill, cross and drilled front and rear rotors with evolution brake pads.
Coming soon- 18 inch black mustang bullet rims, GT/GTP rear bumper, tinted windows.
Top