#65353 - 07/30/09 10:44 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Originally posted by Zalfrin:
Not a very useful scan, but yeah, I agree. MAF for sure and MAP looks low. Have to do some checking on those wires/connections.
Next time give us some idle then some light throttle. Add TPS%, IPW, and O2 on there, maybe IAC position too. Yeah man, I was just throwing things out there, as I wasn't sure as to what the problem was. I think that something is messed up with the MAF wiring. I'm gonna check that out today. If the MAF was bad, would it read 0 like this, or would it be doing something else? Its an 85mm MAF, BTW.
_________________________
Corey Smith 
|
|
Top
|
|
|
|
|
#65354 - 07/30/09 11:56 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/08/08
Posts: 2647
Loc: Iowa City, IA
|
|
it could read 0 due to a failure in the sensor, but it's more likely that you've got the signal wire shorted to ground, or power isn't being applied to the sensor.
_________________________
'99 GTP, L36 bottom, XP cam, Headers, 3.29 gears, FWI, Powrtuner
|
|
Top
|
|
|
|
|
#65355 - 07/30/09 08:06 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
_________________________
Corey Smith
|
|
Top
|
|
|
|
|
#65356 - 07/31/09 08:21 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/13/06
Posts: 6709
|
|
HOw does that belt clear the coil packs? Mine didn't!!
_________________________
 2002
|
|
Top
|
|
|
|
|
#65357 - 07/31/09 10:07 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/08/08
Posts: 2647
Loc: Iowa City, IA
|
|
you've got some weird stuff going on... need to track down that MAF problem. The MAP could be accurate if you've got a bad leak. Your IAC also might be indicating a leak, or it might just be because of the lopey cam...
_________________________
'99 GTP, L36 bottom, XP cam, Headers, 3.29 gears, FWI, Powrtuner
|
|
Top
|
|
|
|
|
#65358 - 07/31/09 11:13 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Originally posted by Zalfrin:
you've got some weird stuff going on... need to track down that MAF problem. The MAP could be accurate if you've got a bad leak. Your IAC also might be indicating a leak, or it might just be because of the lopey cam... The cam isn't THAT lopey. It's just a baby VS, so I wouldn't think so. It's obvious that something is wrong with the MAF. I'm going to try and get another one for cheap and swap it out. I swapped the MAP for this scan, and got the same reading, so I'm pretty sure that the MAP is good. Wouldn't I throw a code (lean) showing the vacuum leak specifically? or is the MAP just showing that?
_________________________
Corey Smith
|
|
Top
|
|
|
|
|
#65359 - 07/31/09 11:14 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Originally posted by 20gtp02:
HOw does that belt clear the coil packs? Mine didn't!! Grinder to the side of the ICM and coil pack bracket worked fine. 
_________________________
Corey Smith
|
|
Top
|
|
|
|
|
#65360 - 07/31/09 12:02 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 10/22/08
Posts: 2083
Loc: Cranston, RI
|
|
Beast! Coming along great. Now comes the fun part of going through all the little annoying omfg I can't believe it took me 3 days to find that problem stage lol
Good luck bro!
_________________________
 04 GTO M6 | HE SS Clutch | Kooks LT's | SLP LM2 | K&N Soon: APS TT kit  SOLD \/ 01 GT | STr5 cam | PT-67 | 18-22psi
|
|
Top
|
|
|
|
|
#65361 - 07/31/09 02:00 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/13/06
Posts: 6709
|
|
Iac values lower with ic and with cams.
_________________________
2002
|
|
Top
|
|
|
|
|
#65362 - 07/31/09 03:07 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/08/08
Posts: 2647
Loc: Iowa City, IA
|
|
Corey's numbers are abnormally high....
_________________________
'99 GTP, L36 bottom, XP cam, Headers, 3.29 gears, FWI, Powrtuner
|
|
Top
|
|
|
|
|
#65363 - 07/31/09 08:27 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Gonna go to the junkyard and try to find another 85mm MAF out of something.
_________________________
Corey Smith
|
|
Top
|
|
|
|
|
#65364 - 07/31/09 09:46 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Newest Scan. MAF fuse was blown. The car still won't idle at all, and keeps stalling. MAP is still throwing a DTC. http://www.scandepot.net/viewscan.php?pk=4767 Help!
_________________________
Corey Smith
|
|
Top
|
|
|
|
|
#65365 - 07/31/09 10:05 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/13/06
Posts: 6709
|
|
IAC counts are high. Stock is 40-50 range. Should be under that at idle.
_________________________
2002
|
|
Top
|
|
|
|
|
#65366 - 07/31/09 11:41 PM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 02/08/04
Posts: 3463
Loc: Gonzales Tx.
|
|
Did you degree your cam install or did you just install straight up? Also did you remove the balance shaft?
|
|
Top
|
|
|
|
|
#65367 - 08/01/09 12:56 AM
Re: Cammed/Intercooled Setup **IT RUNS**
|
Member
|
Registered: 04/18/05
Posts: 8901
Loc: Bradenton, FL
|
|
Originally posted by 20gtp02:
IAC counts are high. Stock is 40-50 range. Should be under that at idle. I see that. Does that mean there is a vacuum leak? And what is going on with the MAP sensor? Originally posted by Chico:
Did you degree your cam install or did you just install straight up? Also did you remove the balance shaft? Straight up, and I kept the balance shaft.
_________________________
Corey Smith
|
|
Top
|
|
|
|
|
|
Previous Topic
Index