We all know my mufflers are Jimmy-rigged to my car and they look very poor.

Well, now the right side is hanging to the point where I just can't leave it like this any longer.

So I have 2 options and I need some opinions.

1. Go to a junkyard and pull the cat-back off a GT/GTP, cutting it off so I still have the flange for the u-bend delete. I will have to cut off the mufflers and do all that crap again. It will probably cost between $70-$100

2. Buy a ZZP 3" stainless cat-back with a new res and no muffs or tips. It's a bigger, louder exhaust and will hang like OEM (at least on the pass. side it will, I have an SE) However, I wonder if 3" is just too much. Total price somewhere around $400-$450.

Go Turbo!

But if you do plan on mods and fixing this exhaust mise well do it right and get the D/P. Most say 3".

I say go to the junkyard and get a catback and a bumper off of a GT/GTP. That would look MUCH better. IMO.

Since you're not really wanting to mod anymore that's what I would do.

Just get a bumper and have a shop weld some hangars

20gtp02, I just got a P-log and 2.5" DP w/ cat.

It's just hangin real bad by the bumper.

It's going to be tough finding a bumper methinks.

How do I get it painted to match my car and whats a reasonable price for the bumper?

Coat hanger wire and new GT bumper!
You could try to contact ed morad here in Cleveland and see about shipping it. Might even have your color.

x2, I was just about to say that. That is, of course, if you can't find one at your local junkyard.

Aren't Ed's bumpers like $500+? That's a bit more than I was hoping for.

His bumper covers are quite cheap.

I don't even think the stealer charges over $200.

Here's a link to his Ebay store: Morad Parts Company

Just thinking, if a bumper is $500, then we would be rinding in a High end luxury car. (You can add in your luxury car, I didn't want to be bias!)