Topic Options
Rate This Topic
#88274 - 04/25/07 02:18 PM Looking for a Write-up
POZTERBOY Offline
Junior Member
Registered: 04/25/07
Posts: 3
Loc: Minnesota
Hey Guys,

I dont personally drive a GTP, but a buddy does, its a 1998

we are planning on doing a full brake job (rotors AND calipers)

are there any good write-ups?

thanks guys.
please post the link, or email me at

jared_christiansen@pba.edu
Top
#88275 - 04/25/07 02:22 PM Re: Looking for a Write-up
theone2043 Offline
Member
Registered: 02/09/07
Posts: 1937
Loc: Pocono, PA
yea on zzp if you look under the brake caliper upgrade they have a right up in there
_________________________
Top
#88276 - 04/25/07 03:01 PM Re: Looking for a Write-up
POZTERBOY Offline
Junior Member
Registered: 04/25/07
Posts: 3
Loc: Minnesota
i dont know what ZZP is...I am totally a noob with GTP's...
Top
#88277 - 04/25/07 03:07 PM Re: Looking for a Write-up
Arcxnus Offline
Member
Registered: 04/05/05
Posts: 1921
Loc: Texas
www.zzperformance.com

Good luck. It doesn't look hard.
_________________________
Quote:
Originally posted by HercMan:
Sounds like corrosion has had it's way with your nuts.
Top
#88278 - 04/25/07 03:41 PM Re: Looking for a Write-up
RooK Offline
Member
Registered: 03/07/05
Posts: 5158
Loc: Southern KY
It's real simple. Jack the car up, remove the wheel. Two bolts to remove the caliper and it's off. The pads just slide out of the bracket. To replace the rotor, you have to remove the bracket, two more bolts. Then the rotor just slides off. Very simple as far as brakes go. Only special thing you might need beyond a large c clamp and socket set is a breaker bar.
_________________________
'13 Mustang 3.7V6 - MT82
'00 GP SE (L67 Swap, XP, Headers, 3.25")
'98 GTP, '01 Bonne
Top
#88279 - 04/25/07 03:57 PM Re: Looking for a Write-up
theone2043 Offline
Member
Registered: 02/09/07
Posts: 1937
Loc: Pocono, PA
_________________________
Top
#88280 - 04/25/07 05:58 PM Re: Looking for a Write-up
POZTERBOY Offline
Junior Member
Registered: 04/25/07
Posts: 3
Loc: Minnesota
AWESOME!! thanks guys
Top
#88281 - 04/25/07 10:55 PM Re: Looking for a Write-up
Dre da GP man Offline
Member
Registered: 06/12/06
Posts: 2694
Loc: Alexandria, Virginia
I did mine as well and its easy and I'm not a machanic at all.
_________________________
Exterior- stock painted black wheels, clear corners, stainless steel grill, cross and drilled front and rear rotors with evolution brake pads.
Coming soon- 18 inch black mustang bullet rims, GT/GTP rear bumper, tinted windows.
Top