#107193 - 10/18/07 07:21 AM
Re: 97-03 FAQ, Perf mods, common fixes read first
|
Member
|
Registered: 09/12/03
Posts: 14035
Loc: Fort Worth, Texas
|
|
SS M90 Originally posted by D: Ok well I'm bored and maybe Herc or Bobby can put this in the FAQ section, so its there for people to see.
SS M90 Build:
First off you need the ZZP Install Kit . Now with this if you have a 99 or newer car you will need the Alternator bracket, so you will have to pick that in the drop down menu. Now unless you have a Powrtuner or HP Tuner then you need to have ZZP do you programming. As far as the Option 3 if you want to start out with the 4.0" pulley then you will have to upgrade your injectors to GTP 36# injectors. If you have a 01 or newer GP then you will need the injector harnesses which you can also get from ZZP.
Now along with the ZZP install kit you will need 4 other things.
1. You will need a Machined Intake , the reason for this is b/c the injectors are at a different angle so ZZP custom makes there LIM to work with the injector angle of the L36. In this window you would need to select SS M90 for L36 converstion. Add the core charge and I also suggest you get the LIM gasket so you don't have to go searching for it later.
2. You will need the ZZP Billet Fuel Logs . The reason for these is b/c your old rails will not fit with the blower on the top of the engine. You can try and modify L67 fuel rails, but its a PITA, and unsafe is you dont do it right. So it may be expensive but easyer to by the rails. Just pick SS M90 in the drop down menu.
3. You will need a Ported M90 Supercharger , you need this blower b/c it is also custimized to fit on top of the LIM and adds cleance for the injectors. First pick your year then the core charge then pick SS M90, you dont need the Oil b/c it comes with the SS install kit.
4. You will need a ZZP Modular Pulley System , now if you are upgradeing the injectors then get the 4.0" if not then get the 4.2".
Now that is about it, but as a side note you will need Synthetic Oil after you are done and you have to do and oil change along with add some coolant.
Now for my option, I think you should add a few more things to the cost of the project either a Powrtuenr or HP tuner b/c you will need to scan and adjust fuel and timing to get the most power out of your set up or you can invest in someone to tune your car like a tuner shop, so you can also get the most out of the kit. Also I would spend the extra money and upgrade injectors and get the 4.0 pulley becuase you will regreat it after you are done and you only have the 4.2 pulley on, and for alittle more money you get alot more power.
With the Kit you should look to spend close to about $1500, if you can get the cores cheaper then you then it will safe you some moeny, If you add the upgraded injectors and a PT or HP tuner then you should look to spend close to $2100. But its all in what you want. This is basically just a guide for you guys I may have missed something that is why I would suggest before you order call ZZP or email ZZP and see what they have to say, but other then that this should be it.
Ray Originally posted by Chico:
I would add that 1.9 rockers and a plog and rear pem + a 3.8 pulley would be on my list of minimums.Chico(pops)
|
|
Top
|
|
|
|
97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
10/03/05 03:22 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
05/13/06 07:40 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
AustinGTP
|
08/23/06 08:30 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
AustinGTP
|
09/06/06 06:22 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
02/27/07 10:27 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
03/31/07 01:41 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
AustinGTP
|
04/08/07 06:43 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
04/10/07 04:29 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
04/26/07 05:44 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
AustinGTP
|
07/15/07 09:31 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
10/18/07 07:21 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
10/19/07 07:44 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
11/08/07 10:17 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
11/19/07 07:38 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
AustinGTP
|
12/27/07 04:02 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
AustinGTP
|
02/13/08 06:45 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
03/15/08 04:54 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
04/07/08 07:36 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
04/10/08 05:45 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
05/24/08 09:36 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
08/26/08 04:03 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
11/22/08 05:15 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
12/18/08 06:57 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
01/06/09 08:08 AM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
01/12/09 08:24 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
02/11/09 02:36 PM
|
|
Re: 97-03 FAQ, Perf mods, common fixes read first
|
HercMan(Rob)
|
05/19/09 12:21 PM
|
|
|
|
Previous Topic
Index