Here ya go:

REMOVAL PROCEDURE

Remove the engine air cleaner.
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging . See: Service and Repair
Remove the radiator.



Remove the liquid line nut from the condenser.



Position the liquid line aside from the condenser.



Remove the compressor hose nut (1) from the condenser.



Position the compressor hose aside from the condenser.


Remove the condenser.

INSTALLATION PROCEDURE

Install the condenser. IMPORTANT: Lubricate the new O-ring seals with mineral base 525 viscosity refrigerant oil.

Install the new O-ring seals onto the compressor line and the liquid line.
Install the compressor hose to the condenser. NOTE: Refer to Fastener Notice in Service Precautions.

Install the compressor hose nut to the condenser. Tighten Tighten the compressor hose nut to 16 N.m (12 lb ft) .

Install the liquid line to the condenser.

Install the liquid line nut (1) to the condenser. Tighten Tighten the liquid line nut to 27 N.m (20 lb ft) .
Install the radiator.
Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging . See: Service and Repair
Leak test the A/C system. Refer to Leak Testing .
Install the engine air cleaner.