Uhm.. So you're wanting to replace an engine and haven't looked yourself to see what is involved.. Interesting..

Just off the top, you'll need a new harness, PCM, tranny (the 4T65E will not bolt up directly) or a new flexplate with the L67 crank holes on the L36 plate along with rebalancing.

Lessee... You'll need all the fuel lines. Different fuel pump to get the extra pressure while under boost (don't forget that resistor!).

No doubt there are odds-and-ends that i'm not thinking about, so keep those in mind.

This is going to probably cost more than you're wanting to spend.. I would HIGHLY suggest the centrifugal supercharger that ZZP is building. Easy bolt-on to the L36 and relatively inexpensive.

ferb!