Removing the Door
Small flat-head screwdriver
Replacement door clips
Remove the two screw
cover caps below door handle.
Remove the two hex
Remove electric accessory
panel from door. Do this by prying the bottom end out first and then sliding
downward. Be careful - there is a plastic piece that hooks behind the door
Gently pull top of
tweeter mount (8-speaker system) loose, but don't remove. This piece is
attached to the door panel and can break off.
Gently slide door
panel tool behind door and onto door clip.
Pry until panel loosens
(The rest of the pictures demonstrate the locations of the clips).
Unplug light and tweeter.
There is one clip
which will break. It appears to be designed as an indicator.
The picture of my
tool (though fuzzy) is actually a window handle remover. It works for me,
but I still suggest using a real door panel tool. They look very similar.
I suggest having a
new set of clips on hand. Even if none break, they just don't hold as tightly
as new ones.
When putting door
back on, line up all clips before locking the door in place.
those looking to put 6.5" speakers in doors, I don't recommend doing it.
The mount would have to be remolded. Besides, any good set of 5.25" 's
sound just as good, as long as you have a nice sub.